Decorative Aluminum Expanded Mesh/Expanded Metal/Metal Fencing

• Material: Steel, Galvanized, Stainless Steel, Aluminum etc
• Application: Construction Wire Mesh, Protecting Mesh, Decorative Mesh, Filter, Sieving Diversified Pellet, Barbecue Wire Mesh
• Hole Shape: Diamond,Round,Square,Hexagonal, etc
• Model NO.: ZJ-GBW
• Usage: Protection, Aquaculture, Water Conservancy Construction, Civil Building, Railway Construction, Road Construction
• Weave Characteristic: Stamping
• Surface Treatment: Hot-DIP Galvanizing, Anti-Rust Paint, Powder Coate
• Stamping Expanded Metal Mesh Category: Expanded Metal Mesh
• Galvanized Surface Treatment: Hot-galvanize
• Hot-galvanize Technique: Wire Annealing
• Specifications: as Your Request
• Weight: Heave-weight
• Aperture: 2.0-50mm
• Mesh Length: 1-10m
• Mesh Width: 0.5-2m
• Lwd: 4.5-100mm
• Swd: 2.5-550mm
• Sheet Thickness: 0.5-8mm
• Opening Style: Flattened, Standard (Raised)
• Model: Hn, Hx, Nm, Bj, etc
• Transport Package: Wooden Box, Metal Pallet, etc
• Specification: according to client′s requirement
• Trademark: Zhuojian
• Origin: Anping, Hengshui, Hebei, China
• HS Code: 7314500000
• Production Capacity: 50000piece/Week

Product Description

How is expanded metal made?

Expanded metal Sheet is produced from metal sheet or roll through stamping and expanding, which forms a wide array of diamond shaped openings with uniform sizes.

Compared with the traditional flat metal sheet, expanded metal mesh has more notable advantages for its versatile applications.

Owing to the expanding process, the metal sheet can be expanded up to 8 times its original width, losing up to 75 % its weight per meter, and becomes harder. So it is lighter, less expensive than a single metal sheet.

What is expanded metal?

Expanded metal mesh types includes raised expanded steel mesh (also called standard or regular expanded metal) and flat expanded metal mesh.

Raised expanded metal mesh has diamond openings with slightly raised surface. Flattened expanded metal mesh is manufactured by passing the standard expanded sheet through a cold roll reducing mill, forming diamond openings with flat surface.

The form of the meshes is normally rhombic but more shapes are available, such as hexagonal, oblong and rounded. The size of the meshes varies from very small meshes 6 x 3 mm suitable for filters, to very large meshes 200 x 75 mm often used for architectural applications.

The materials most often utilized for expanded metal are mild steel, aluminum and stainless steel, but we also offer in other materials (brass, copper, titanium, zinc, etc).

The length and width of the sheet and the grid parameters are always described according to the following pictures.

Expanded metal specification:

• Materials: carbon steel, low carbon steel, iron, aluminum, stainless steel, copper, titanium
• Expanded metal Strand thickness: 0.3mm-8.0mm
• Expanded metal Strand Width: 0.3mm-8.0mm
• Expanded metal Width: 0.5m - 2.4m.
• Surface treatment: hot-dip galvanizing, anti-rust paint, powder coated, PVC coated, etc.
• Lwm: 3.0mm-100mm
• Swm: 2.0mm-80mm
• Sheet size is according to client's requirement

  Mesh thickness(mm)	Distance short(mm)	Distance long(mm)	Strip(mm)	Width (m)	Length(m)	Weight(kg/m2)
  0.5	2.5	4.5	0.5	0.5	1	1.8
  0.5	10	25	0.5	0.6	2	0.73
  0.6	10	25	1	0.6	2	1
  0.8	10	25	1	0.6	2	1.25
  1	10	25	1.1	0.6	2	1.77
  1	15	40	1.5	2	4	1.85
  1.2	10	25	1.1	2	4	2.21
  1.2	15	40	1.5	2	4	2.3
  1.5	15	40	1.5	1.8	4	2.77
  1.5	23	60	2.6	2	3.6	2.77
  2	18	50	2.1	2	4	3.69
  2	22	60	2.6	2	4	3.69
  3	40	80	3.8	2	4	5.00
  4	50	100	4	2	2	11.15
  4.5	50	100	5	2	2.7	11.15
  5	50	100	5	1.4	2.6	12.39
  6	50	100	6	2	2.5	17.35
  8	50	100	8	2	2.1	28.26

Opening style of expanded metal:

Advantage of expanded metal :

The advantages of using expanded metal are numerous and depend on the specific application. Below we have listed a few of the reasons for selecting expanded metal.

Light and cost-efficient

It is a great advantage that expanded metal is not assembled nor welded, but always made in one piece.

• No metal is lost in the expanding process, hence expanded metal is a cost-effective alternative to other products.
• Because there are no strained joints or welds, expanded metal is stronger and is ideal for forming, pressing and cutting.
• Due to the expansion the weight per meter is less than that of the original sheet.
• Due to the expansion a much bigger open area is possible compared to other similar products. 

Greater strength

The three-dimensional shape of the meshes is another advantage since the areas where the meshes meet are strong and enable the material to stand a far heavier point load than similar products or a flat sheet.
 

Anti-skid qualities

Some patterns have a type of mesh with special qualities that not only make the surface non-skid, but also give the expanded metal water and wind repellent qualities.
 

Ideal for secondary operations

The expanded Metal is ideal for secondary operations. To save time and to help reduce your costs  offers to handle the secondary operations for you. It could be flattening, bending, welding, hot dip galvanizing, painting or anodizing of the expanded metal.

Applications:

The different types of meshes have different degrees of strength since the open area and weight of each type can vary substantially. Below we have listed examples of the many situations where expanded Metal can be used with advantage.
 

The high strength and the anti-skid qualities make expanded metal most advantageous for:

• Walkways
• Footbridges
• Footsteps
• Ramps
• Platforms
• and similar applications.

Expanded metal can also make an effective barrier and is favorable for use in security/safety applications to protect e.g. buildings, people or machines. Expanded metal also achieves a sound reduction and shielding effect, ideal for use in airports and bus stops.

Expanded metal is a very popular material for today's architectural and industrial design and our many customers all over the world use it for many other applications apart from those mentioned above. 

Building / Architecture

Examples of applications in buildings where the use of  expanded metal will be a benefit:

• Cladding
• Ceilings
• Facades
• Sun protection
• Fencing
• Shielding

For these applications the  expanded metal most commenly used has a rib width larger than 20 mm.

Expanded metal can also be used for reinforcing concrete, plastic, artificial materials or for acoustic panels.
It also works well as a decorative product where there is a requirement for a coarse appearance.

Agricultural and Industrial sectors

Examples of applications in the agricultural and industrial sectors where the use of expanded metal will be beneficial:

• Filtration
• Ventilation
• Laminated metal for draining floors for farm buildings
• Floors in containers
• Heat exchangers for several applications to hold the tubes
• Earthing of electricity
• Walkways for cranes
• Protection / shielding in front of dangerous elements 

Feel free to contact us for more information and let us find the right solution to your needs.
Product Display:
Production process:
Company profile
Your enquiry and visit would be welcomed very much!